• telephone 热线: 400-8061-521

  • 新闻广告

    How to improve fiber laser cutting quality of your machine?


    2019-10-26 11:34:39

    As we all know, the most important advantage of metal laser cutting machine is that it can greatly improve the cutting accuracy. However, many customers have such problems during the actual use process, that is, only pay attention to the cutting speed, which will lead to the product quality can’t be effectively controlled. So how to ensure the quality of laser cutting? Let G.WEIKE tell you.

    1.Preparation before cutting

    In order to improve the cutting quality, it is necessary to carry out scientific and reasonable cutting design, review and repair the drawings before cutting.

    2.During cutting

    During the cutting process, in addition to adjusting the relevant parameters of the machine according to the material thickness, your operator should pay attention to the cutting quality of the sample. The batch cutting shall be carried out only after the sample printing quality is qualified enough. 

    3.Correct adjustment of focus position

    Adjust the position of focus according to the material and thickness of the cut. Usually thin carbon steel below 5mm, with zero focal length and focus on the surface of the workpiece, aluminum, stainless steel and other workpiece focus on the surface of the workpiece, when cutting thick carbon steel plate, the focus is on the surface of the workpiece.

    4.Adjust assist gas pressure data

    When cutting at a faster speed, the stability of gas pressure has a great influence on the cutting burr. According to the data parameters provided by G.WEIKE LASER, the best gas pressure can be adjusted to ensure the quality after cutting.

    fiber laser cutting machine

    In fact, no matter how high-tech the machine is, it can’t work it self without operator, so it is necessary to remind the operator or engineer of customers to learn how to use the machine from G.WEIKE, or if customers have any problems with machines, please feel free to call G.WEIKE 24 hours after-sales service hot line:

    CO2 laser machine after-sales: 86-15628816636

    Fiber laser cutting machine after-sales: 86-18663766501

    Tube&Sheet dual use fiber laser/tube fiber laser after-sales: 86-15665806359

    China time after 22:00, please make an appointment with your sales before call.


    *本站相关网页素材及相关资源,如有侵权请速告知,我们将会在24小时内删除*

    济南金威刻科技发展有限公司@版权所有. 鲁ICP备12015689号